Why can't I tilt the floor bolts when installing them?

If the installation of the foot bolt is not vertical, it will definitely cause the error in the installation coordinates of the bolt, which will cause some difficulties in the installation, and it is even impossible to install the bolt if the base of the bolt hole is very thick. As the bolts are not vertical, their ability to withstand external forces is reduced. Relatively speaking, the ability of the footing bolts becomes smaller in the case of force, and they are more likely to be damaged or broken. At the same time, the action of the horizontal component force causes the base to rotate in the horizontal direction, so the equipment is not easily fixed.

Sometimes the equipment that has been installed is likely to change its position before the secondary grouting due to this partial force, resulting in rework or quality accidents. At the same time, due to the existence of horizontal partial force, once encountered external forces, it is possible to make the equipment that has been squared to produce errors, which is not allowed, so when installing the foot bolt, it must be installed vertically to avoid the phenomenon of tilt.

　　The installation process should be detailed in the corresponding construction records, a true reflection of the type of ground bolts, specifications and other content, for future maintenance, replacement to provide effective technical information.